Item Type:Turn Signal Light
Origin:Mainland China

This Marker Wire Adapter plug connector allows you to exchange your OEM indicators for aftermarket blinkers with a simple plug n play install. Check your plugs to ensure connector style needed prior to purchase. This is a two wire connector; your system may have a three wire signal, this plug will delete the running light unless your system has the 3rd wire connected separately.  See our Storefront for other Motorbike Makes and Models Turn Signal Wire Adapter Plugs. Stats: Plug:OEM Direct Fit Plug Wiring:Two Wire, 12 Volt Systems, Length is approximately 8.5 inches May also fit other bikes. Please do your own research if replacing on a bike other than listed below. Fitment Information: FOR HONDA: FRONT: 11-13 CB1100 CB400SS NC41 06-10 NT 700 V Deauville 06-09 CBF1000 08 CB1300S (ABS) Super Bol d'Or 02-06 CBR 125 R, JC34 03-12 CBR600RR 04-12 CBR1000RR REAR: VTR250 CB1300SF CB400SF CB400SS NC41 08 CB1300S (ABS) Super Bol d'Or 02-06 CBR 125 R, JC34 03-12 CBR600RR 04-12 CBR1000RR 15-16 CB650F 13-17 CB 500F/CB 500X/CBR 500R 14-16 CTX700 12-15 NC700 14-16 CBR650 10-17 VT750C2B 08-16 VT750  VT750C VT750CA SHADOW AERO 02-08  VTX1800C 02-08  VTX1800F 10-15 VT1300 VT1300CS VT1300 CX Install Notes: We recommend disconnecting the battery before starting any electrical installation. The installation difficulty will vary depending on your application (fairing and wire location). You'll need to locate the existing Turn Signal Wires on your Motorcycle and remove your OEM flashers by unplugging them. Install your other lights and connect them to our wire adapter plugs bullet connectors. Then connect the adapter plug into the OEM plug coming from your bikes harness. We recommend reconnecting the battery and testing the lights before reinstalling the fairings.