Peak Current:400 A Special Features:Lighting Item Weight:17g without battery Voltage:24V Conversion Rate:60%~70% Battery Capacity(mAh):2000-3000 External Testing Certification:WEEE Number Of Built-in Batteries:2 Origin:Mainland China Battery model::3 AG3 button batteries Bit diameter::3mm/0.1lin Measuring range::24~250V Material of batch head::vanadium steel b Item model number::B12 Material::Drop-resistant insulating ABS Product Type::LED Screwdriver Electric Model Name ::Voltage Tester Pen
Bullet Points:
1. Precise Search: When the test pen detects along the line, the green light will always be on at the position where the line is connected, and the disconnection point at the position where the light is off.
2. Wire Identification: Put your hand on the lid and touch the pole, insert the voltage measuring pen into the air, the electric pen lights up with double-color red and green lights, it is the live wire, lights up the green light for the zero line
3. Electric Pen Battery Self-Inspection: After the battery is installed in the screwdriver electric pen, self-inspection is required. If the green light is on, the battery is fully charged, and the battery is low if the light is off or weak.
4. High-Quality Material: High-hardness chrome-vanadium steel material has good conductivity, the main board professionally upgrades the chip control program, higher security, and longer life
5. Humanized Design: The test pen is small and portable, the clip design is convenient for electricians to carry out maintenance, and the light can be lighted for easy identification
Product Description:
1. Multi-function such as zero-fire wire discrimination, wire breakpoint detection, wire on-off detection, battery self-test, etc.
2. Small and portable, the clip design is convenient for electricians to carry out maintenance
3. The green light is always on at the position where the line is connected, and the line is disconnected when the light is not on.
4. High hardness chromium-vanadium steel material has good electrical conductivity
5. After the battery is installed, the screwdriver and electric pen need to self-test
Specification:
1. Product Type: LED Screwdriver Electric Pen
2. Item model number: B12
3. Material of batch head: vanadium steel batch head
4. Measuring range: 24~250V
5. Bit diameter: 3mm/0.1lin
6. Net weight: 17g (without battery).
7. Battery model: 3 AG3 button batteries
8. Material: Drop-resistant insulating ABS
Product List:
1*Multifunctional induction test pen
