Supporting Hard Drive Capacity:2TB
External Interface:USB
Package:Yes
Internal Interface:SATA
Case Material:Aluminum
Size:1.8"
Model Number:SD03
Origin:Mainland China
M.2 SATA:support
PCIE NVME:support
B+M key:support
M key:support

Select Ship from Spain and it only 3-7 days arrived and it will much cheaper than you select it ship from China
Pls click below picture to enter the product detail information
SD03A and SD03-1 docking station support Dual protocal SSD with M.2 SATA and M.2 NVME
1. If your SSD is M.2 SATA with "B+M "key, it can works with my docking staiton
2. If your SSD is M.2 Nvme with "M" key or "B+M" key, it can works with my docing station
This SSD docking station can slove your problem that you hv M.2 SATA SSD and m.2 NVme SSD,but it take too much time for you to install SSD enclosure. It is very convenient for you to use  one docking station with dual protocal, no only support M.2 SSD but only support M.2 NVme SSD.
Too different protocal SSD may be a trouble things for you to change SSD docking staiton after you use one kind of protocal SSD.
So do you still have these problems as below?
1. Too many M.2 SSD it takes time and effort to install the Enclosure
2. Too many protocols, need corresponding equipment Time-consuming, laborious, and costly.
3. Poor compatbility Speed drops, results in transmission lag
This dual protocol M.2 Docking Station will help you slove above problem.
The bigest funtion is support different interface and size of M.2 NVMe /SATA protocol.
1. Support two protocol M.2 with four size 2230/2242/260/2280
2. Support "M" key and "B+M" key as below picture shows.
The second high light point is high-speed transmission: 10Gbps speed.
1. Equipped with USB 3.1 Gen 2 interface,Significantly improve the efficienc of reading and writing,     and transfer large files instantly.
2. Transmission speed up to 900 MB/s.
3. Equipped with NVMe protocal hard disk： transfer speed 900+MB/S.
4. Equipped with SATA protocal hard disk：
transfer speed 440+MB/S.
RTL9210B Main control escort
With UASP and TRIM funtions,it can reduce the CPU load, Reduce the number of erasing and writing, faster and more durable
.
Note:The chip picture comes from the rendering,for reference only, please refer to the actual product.
Heat conduction and heat dissipation in one
Adopting vertical in-line design, hard disk heat dissipation is unobstructed, ensuring low-temperature operation of hard disk.
The base shell is made of aluminum alloy,which quickly dissipates heat without damaging the hard disk.
Support the following M.2 SSD interfaces.
NVme and M..2 SATA with "M" key or" B&M " key.
1 G large file transfer in 1 second.
Equipped with USB 3.1 Gen 2 interface, the traansmission rate is up to 10 Gbps, Significantly improve the
efficiency of reading of reading and writing, and transfer large files instandtly
One kind of cable, mutil-faceted application.
Type-C-USB-A connects to laptops, desktops,all - in ones, etc.
Type-C-Type-C connect to mobile phone.
1. Connect a laptop.
Quick file backup,smooth play of large games.
2. Connect type-C mobile phone.
Enjoy HD movies and massive photos instantly.
Lightweight and easy to hold.
Small and mini shell design, easy to carry, does not take up space
Non-slip silicone pad at the bottom.
The bottom non-slip design,equipped with non-slip silicone pad, put it on the desktop is more stable
More stable placement
Specifications
Product number： SD03
Supporting device: SATA/NVME protocol M.2 solid state drive.
Product color: Space gray
Support capacity: M.2 single disk supports 2TB MAX
Product Size: 51 X 66 X 13 cm
Product Material: Aluminum alloy
Product weight: 140g