Peak Current:1000 A Certified:ce Fast Charge:None Special Features:USB,SOS Lighting Item Weight:2kg Voltage:12V Conversion Rate:80%~85% Battery Capacity(mAh):10000-12000 External Testing Certification:ROHS,ce Number Of Built-in Batteries:4 Origin:Mainland China Certification:RoHS,CE Size:1375*79*335mm Output:12V Jump Start USB TYPE-C Input:5V 2A: 12V Jump Start Input:12V 1A Full Charging Time:5 hours DC Output:12V 8A LED light/Torch light / sos / Strobe Feature:Quick charge,for power supply to 12V electronics,led flash light,Powerbank,Power bank,12v automotive battery charger
Product Parameter
Size:1375×79×335
Output: 5V 2A: 12V Jump Start
Input: 12V 1A
Full Charging Time: 5hours
Operating Temperature:-20-+65
OPERATION GUIDANCE
Charging for Jump Starter itself:
1 . Plug the micro input to the universal socket
2 . Connect 12 1A input port of Jump Starter
indicator Lights----Press the switch button to check the capacity of Jump Starte
3.1 Soild-25% Capacity 2 Soild-50% Capacity 3 Soild-75% Capacity 4 Soild-1000% Capacity
4.When charging, indicator lights will flash one by one. The number ofsolid indicator lights indicates the battery capacity of Jump StarteFull indicator lights are solid when charging is pause or complete
5.LED illumination-----Press the switch button 3 seconds to start the LED illuminationand then 4 modes of LED light appear in sequence ( normal . Strobe.Sos off ) if you press lightly
6.Charging Procedures
a . Make sure the mobile electronic device is 5V powered
b . Connect the USB charging cable to the USB Power Port on the Power Bank
c . Choose the proper charger connector head for the mobile electronic deviceand plug it into the mobile electronic device charging port
d . Press the Power Button start to charge the mobile electronic device
7.Charge movile electronic devices
The power bank affers an USB charging cable with different types of chargerconnector heada for Iphone ipad , Ipod . other brands mobile tablets , and othe DC 5V powered electriance devices
For jump start of 12V vehicle
1.Make sure that the number of indicator Light is not less than 3.
2 . Connect the red battery clamp of jumper cable to thevehicles positive ( + ) battery terminal and connect the blackbattery clamp of jumper cable to the vehicles negative (- )battery termina
3 . Plug the cord of jumper cable into the jump start socket
4 . Start the vehicle
5 . When the vehicle starts , remove jumper cable from JumpStarter and disconnect red and black clamps to the vehicbattery terminals within 30 seconds
6 . Leave the vehicles enging Running
1.FAQ :
Q. How to turn off this appliance?
A . This appliance will power off automatically when no load orcharging is complete
Q. How many times can it fully charge for mobilephone ?
A . Take Iphone 4 as sample , it can be fully charged for 3 times
Q. How long will this appliance take to charge my mobile phonefull ?
A.Approx 1 hour
Q. How many times can this appliance on a full charge to start the Vehicle
A Approx 20 times
Q. How long will the power of battery of this appliance rem in ?
A . 6-12 months , however , we suggest you recharge it each 3 months
Warning
1 . Do make the blue plug into the Jump starter socket tightly when Jump starthe vehicle . If not , It can'tjump start the vehicle , and even make the joint melt.
2 . Do check whether the battery clamps well connected ; battery connectorrusted , dirty if the vehicle can not be started . Jump start again after cleaningDo not continue to jump start if 3 times not successfully . If not , it will damagethe product Do check the vehicle for other reasons
3 . Do remove the product from the vehicle within 30s after the vehiclestarted . If not , it may lead dangerous
4 . Do not connect the two clamps . If not , it may lead dangerous
5 . Do not decompose product . If not , it may lead dangerous